[ecoop-info] Final CFP and deadline extention: FMCAD 2010

[natasha.sharygina at usi.ch]

 [Apologies if you receive multiple copies of this CFP]

************************************************************

                 FMCAD 2010
               Final Call for Papers
International Conference on Formal Methods in Computer-Aided Design

              Lugano, Switzerland
               20-23 October 2010
             http://fmcad10.iaik.tugraz.at/

IMPORTANT DATES

Abstract Submission:    5 May 2010
Paper Submission:     12 May 2010 (extended)
Author Notification:  7 July 2010
Final Version:         28 July 2010
Conference:  20-23 October 2010

CONFERENCE SCOPE

FMCAD 2010 is the tenth in a series of conferences on the theory and
application of formal methods in hardware and system design and
verification.  FMCAD provides a leading international forum to researchers
and practitioners in academia and industry for presenting and discussing
novel methods, technologies, theoretical results, and tools for formally
reasoning about computing systems, as well as open challenges therein. This
year, FMCAD is privileged to have Joseph Sifakis, Founder and Director of
VERIMAG Laboratory, a Turing Award 2007 winner, to deliver its keynote
address on Scientific Challenges and Work Directions in Embedded Systems
Design. The tutorial speakers are Ken McMillan, a Paris Kanellakis Award
winner, senior researcher at Cadence Berkeley Labs, Warren Hunt, Professor
at University of Texas at Austin, Sumit Gulwani, a researcher at Microsoft Research,
USA, and Jin Yang, a senior staff research engineer at Intel Strategic CAD Labs.


NEW: FMCAD 2010 has two tracks (but no parallel sessions): the research
track and the industrial track.

RESEARCH TRACK

Topics of interest:

   Advancing industrial-strength technologies in Model Checking,
   Theorem Proving, Equivalence Checking, Abstraction and Refinement
   Techniques, Reduction and Abstraction Techniques, Compositional
   Methods, Decision Procedures, SMT solvers, Bit-Precise Reasoning,
   Word-Level Techniques, SAT- and BDD-based methods, Probabilistic
   Methods, and Combinations of Deductive Methods and Decision
   Procedures.

   Applications of Formal Methods in Specification, Design and
   Verification

   Topics relating to the application and applicability of Property-Based
   Verification, Equivalence Checking, Semi-formal Verification, Runtime
   Verification, Simulation and Test-case Generation, Coverage Analysis,
   Microcode Verification, Concurrent Systems, Timing Verification, and
   Formal Approaches to Performance and Power.

   System-Level Design and Verification, especially for Embedded
   Systems, Software Verification, HW/SW Co-Design and Verification,
   Transaction-Level Verification.

   Modeling and Specification Languages, Model-Based Design,
   Verification-Based Testing, Design Derivation and Transformation,
   Correct-by-Construction Methods.

INDUSTRIAL TRACK

   This track is dedicated to industry users of formal methods, including
   work on real industrial-scale designs being done in universities and
   research organizations. We invite such users to describe their experience with
   formal methods, including evaluations of commercial tools, case studies of
   industrial-scale applications, experience reports on novel and challenging
   applications, or methodologies for the incorporation of formal or semi-
   formal methods into the industrial design flow.  Finally, we invite tool
   presentations, of industrial-strength commercial tools as well as novel
   academic tools that are not yet industrial strength, but address a real
   industrial need.  Tool presentations should describe the capabilities or
   novel features of the tool, or an innovative algorithm, a new approach,
   or original application methodology.

   EXHIBITION

   FMCAD 2010 will feature also an exhibition with limited free-of-charge
   booth space for which academic novelty is not a requirement.  Note that
   since space is limited, we will not be able to accept every request for a booth,
   and that preference will be given to requests by authors of accepted tool
   presentations.  EDA vendors are especially encouraged to submit a tool
   presentation and/or to request booth space in order to demo their tools.

SUBMISSIONS

   Submissions must be made electronically in PDF format via EasyChair.
   More details will be provided on the FMCAD web site.  The
   proceedings are planned to be published by IEEE and ACM and will be
   available online in the ACM Digital Library and at IEEE Xplore.

   Research Track Submissions

   Two categories of research papers can be submitted: regular papers (8
   pages) containing original research, and short papers (4 pages) describing
   emerging results and work-in-progress.

   Industrial Track Submissions

   Submitters to the industrial track will have the option of submitting a
   regular paper (8 pages), a short paper (4 pages), or a deck of up to
   25 slides (for tool presentations: 4 pages or 15 slides). Both papers
   and slide submissions will be reviewed. Regular and short papers will
   appear in the proceedings as usual, while authors of accepted slide
   presentations will be invited to write a one page abstract for the
   proceedings.

   For exhibition space, submission is not required and an email request to
   the industrial track chairs is sufficient.  However, due to limited space
   we will not be able to accept every request.  We therefore strongly
   advise those interested in exhibition space to submit a tool presentation,
   as we will give preference for booth space to authors of accepted tool
   presentations.

   Regular and short papers must use the IEEE Transactions format on
   letter-size paper using a 10-point font (see
   http://www.ieee.org/conferences_events/conferences/publishing/templates.html).
   Research Track papers must contain original research that has not been
   previously published, nor concurrently submitted for publication.  For
   both research and industry submissions, any partial overlap with a
   published or concurrently submitted paper must be clearly indicated.
   (For slide decks, use an extra slide to discuss overlaps; this slide may
   be excluded from the final presentation.)  By submitting their work,
   the authors agree to present it at the conference if selected. Authors
   are strongly encouraged to provide adequate access to their
   experimental data for verification.

   A small number of accepted papers will be considered for a
   distinguished paper award.

CHAIRS

Roderick Bloem<http://www.iaik.tugraz.at/bloem/>, Graz University of Technology, Austria
Natasha Sharygina<http://www.inf.usi.ch/faculty/sharygina/>, University of Lugano, Switzerland and CMU, USA


INDUSTRIAL TRACK CHAIRS

Wolfgang Ecker<http://eda.ei.tum.de/EDA/people/index_html/woe.html>, Infineon, Germany
Cindy Eisner<http://www.research.ibm.com/people/e/eisner/>, IBM Haifa Research Laboratory, Israel


TUTORIAL CHAIR

Helmut Veith<http://www.dbai.tuwien.ac.at/staff/veith/>, Vienna University of Technology, Austria

PANEL CHAIR
Tom Melham<http://www.comlab.ox.ac.uk/Tom.Melham/>, Oxford University Computing Laboratory, UK


PUBLICATION CHAIR

Hana Chockler<http://domino.research.ibm.com/comm/research_people.nsf/pages/hanac.index.html>, IBM Haifa Research Laboratory, Israel


PROGRAM COMMITTEES

Technical Program:

Jason Baumgartner, IBM, USA
Valeria Bertacco<http://www.eecs.umich.edu/~valeria/>, University of Michigan, USA
Armin Biere<http://fmv.jku.at/biere/>, Johannes Kepler University, Austria
Per Bjesse<http://www.perbjesse.com/>, Synopsys, Inc., USA
Roderick Bloem<http://www.iaik.tugraz.at/bloem/>, Graz University of Technology, Austria
Doron Bustan, Intel, Israel
Gianpiero Cabodi<http://fmgroup.polito.it/cabodi/>, Politecnico di Torino, Italy
Alessandro Cimatti<http://sra.itc.it/people/cimatti/>, IRST, Italy
Koen Claessen<http://www.cs.chalmers.se/~koen/>, Chalmers University of Technology, Sweden
Ganesh Gopalakrishnan<http://www.cs.utah.edu/~ganesh/>, University of Utah, USA
Aarti Gupta<http://www.nec-labs.com/~agupta/>, NEC Labs, USA
Ziyad Hanna<http://web.comlab.ox.ac.uk/ziyad.hanna/>, Jasper Design Automation, USA
Alan Hu<http://www.cs.ubc.ca/~ajh/>, University of British Columbia, Canada
Barbara Jobstmann<http://www-verimag.imag.fr/~jobstman/>, CNRS-Verimag, France
Jie-Hong Roland Jiang<http://cc.ee.ntu.edu.tw/~jhjiang/>, National Taiwan University, Taiwan
Vineet Kahlon<http://www.cs.utexas.edu/~kahlon/>, NEC Labs, USA
Gerwin Klein<http://www.cse.unsw.edu.au/~kleing/>, NICTA, Australia
Daniel Kroening<http://www.comlab.ox.ac.uk/people/daniel.kroening/>, Oxford University Computing Laboratory, UK
Thomas Kropf<http://www-ti.informatik.uni-tuebingen.de/~kropf/>, University of Tübingen, Germany
Marta Kwiatkowska<http://web.comlab.ox.ac.uk/marta.kwiatkowska/>, Oxford University Computing Laboratory, UK
Oded Maler<http://www-verimag.imag.fr/~maler/>, CNRS-Verimag, France
Panagiotis Manolios<http://www.ccs.neu.edu/home/pete/>, Northeastern University, USA
Ken McMillan<http://www.kenmcmil.com/>, Cadence Berkeley Labs, USA
Tom Melham<http://www.comlab.ox.ac.uk/Tom.Melham/>, Oxford University Computing Laboratory, UK
John O'Leary, Intel, USA
Lee Pike<http://www.cs.indiana.edu/~lepike/>, Galois, Inc., USA
Marc Pouzet<http://www.lri.fr/~pouzet/>, University of Paris-Sud, France
Julien Schmaltz<http://www.cs.ru.nl/~julien/>, Open University of The Netherlands, Netherlands
Natarajan Shankar<http://www.csl.sri.com/~shankar/>, Computer Science Laboratory, SRI, USA
Natasha Sharygina<http://www.inf.usi.ch/faculty/sharygina/>, University of Lugano, Switzerland and CMU, USA
Satnam Singh<http://research.microsoft.com/en-us/people/satnams/>, Microsoft Research
Anna Slobodova, Centaur, USA
Sofiene Tahar<http://www.ece.concordia.ca/~tahar/>, Concordia University, Canada
Helmut Veith<http://www.dbai.tuwien.ac.at/staff/veith/>, Vienna University of Technology, Austria
Karen Yorav<http://domino.research.ibm.com/comm/research_people.nsf/pages/yorav.index.html>, IBM Research, Israel

Industrial track:

Peter Jensen, SyoSil Aps, Denmark
Pranav Ashar, RealIntent, USA
Lyes Benalycherif, ST Ericsson, France
Per Bjesse<http://www.perbjesse.com/>, Synopsys, Inc., USA
Holger Busch, Infineon
Joachim Gerlach<http://www.fh-albsig.de/~se/personen/gerlach.htm>, Albstadt-Sigmaringen University, Germany
Ziyad Hanna<http://web.comlab.ox.ac.uk/ziyad.hanna/>, Jasper Design Automation, USA
Christian Jacobi, IBM, Germany
Andreas Kuehlmann<http://www.eecs.berkeley.edu/~kuehl/>, Cadence Berkeley Labs, USA
Ajeetha Kumari, CVC Pvt Ltd, India
Viresh Paruthi, IBM, USA
Axel Scherer, Cadence Berkeley Labs, USA
Michael Siegel, OneSpin Solutions, Germany

LOCAL ARRANGEMENTS

Mariagiovanna Sami<http://www.elet.polimi.it/people/sami>, Politecnico di Milano, Italy and University of Lugano, Switzerland
Umberto Bondi<http://www.inf.usi.ch/personal-info?id=456>, University of Lugano, Switzerland
Daniela Dimitrova<http://www.inf.usi.ch/personal-info?id=1230>, University of Lugano, Switzerland
Francesco Regazzoni<http://www.alari.ch/~regaz/>, University of Lugano, Switzerland and UCL Louvaine-la-Neuve, Belgium

---------------------------------------------------------------------------------------------------------------
Prof. Natasha Sharygina
Formal Verification and Security Group

Informatics Department, University of Lugano
http://www.inf.unisi.ch/faculty/sharygina
http://www.verify.inf.unisi.ch<http://www.verify.inf.unisi.ch/>